DieCastor — Precision Die Casting & CNC Manufacturing on DieCastor

CNC Machining Services | DieCastor

sales@diecastor.com (DieCastor Engineering Team) — Sun, 02 Aug 2026 00:00:00 +0000

CNC Machining Services

DieCastor provides CNC machining that turns rough castings, forgings and bar stock into finished, inspection-ready components. Multi-axis machining centers and CNC lathes let us hold tight, repeatable tolerances on the features that matter — sealing faces, bores, threads and locating surfaces — in a single, well-controlled setup.

Multi-axis machining centers finish critical features to tight, repeatable tolerances.

Introduction

Machining is where cast and forged components become functional parts. By combining in-house CNC capability with our casting and tooling processes, we eliminate hand-offs between suppliers and keep lead times short and results consistent.

Contact DieCastor | Request a Quote

sales@diecastor.com (DieCastor Engineering Team) — Sun, 02 Aug 2026 00:00:00 +0000

Contact DieCastor

Reach the DieCastor team for quotes, engineering support and manufacturing questions. The fastest route is the quote form below — send your drawings and specifications and our engineering team will respond with a feasibility review and quotation.

Direct Contact

Email: sales@diecastor.com
Phone: — (set params.contact.phone)
Address: — (set params.contact.address)

You can also explore our Multi-Slider Die Casting, Zinc Die Casting and CNC Machining Services.

Custom Die Casting Parts | DieCastor

sales@diecastor.com (DieCastor Engineering Team) — Sun, 02 Aug 2026 00:00:00 +0000

Custom Die Casting Parts

DieCastor manufactures custom die cast parts to your drawings in zinc, aluminum and magnesium alloys — delivered machined, finished and inspection-ready. From a single prototype to high-volume production, we support the full path from CAD model to certified component.

Produced to drawing in zinc, aluminum and magnesium alloys.

Materials & Grades

Family	Common grades
Zinc	ZAMAK 2, 3, 5, 7, ZA-8
Aluminum	ADC12, A380, A383, A360
Magnesium	AZ91D, AM60B, AM50A
Steel / Brass	1215, 12L14, SUS303, C36000

Manufacturing Process

DFM review of your drawing.
Tooling design and in-house die cutting.
Die casting (hot/cold chamber).
CNC machining of critical features.
Surface finishing (plating, coating).
Inspection and traceable shipping.

Quality Control

Material verification by spectrometer.
CMM inspection against CAD.
First-article approval before series.
Full traceability per order.

Request a Quote

Email sales@diecastor.com or use the form below.

Die Casting Manufacturer | DieCastor

sales@diecastor.com (DieCastor Engineering Team) — Sun, 02 Aug 2026 00:00:00 +0000

Die Casting Manufacturer

DieCastor is a single-source die casting manufacturer combining tooling, hot and cold chamber casting, CNC machining, finishing and inspection under one roof. By keeping every process internal, we keep accountability for tolerance, appearance and delivery with one partner.

Tooling, casting, machining and inspection under one roof.

Why a Single-Source Supplier

One accountable partner for tooling through finished parts.
Shorter lead times with no external hand-offs.
Consistent quality across casting, machining and finishing.
Full traceability from material to shipment.

Processes Under One Roof

Process	Capability
Tooling	In-house die and mold design and cutting.
Casting	Hot/cold chamber zinc and aluminum.
Machining	3-5 axis CNC milling and turning.
Finishing	Plating, powder coat, anodizing, passivation.
Inspection	CMM, spectrometer, X-ray, salt spray.

Materials

We cast and machine zinc (ZAMAK/ZA), aluminum (ADC12/A380) and magnesium (AZ91D), and machine steel, stainless and brass to drawing.

Multi-Slider Die Casting | DieCastor

sales@diecastor.com (DieCastor Engineering Team) — Sun, 02 Aug 2026 00:00:00 +0000

Multi-Slider Die Casting

DieCastor produces multi-slide die cast components — small, complex zinc parts formed with four or more slides acting in a single shot. This process delivers near-net-shape geometry with minimal flash and, in many cases, eliminates the need for secondary trimming, threading or machining.

Four to six slides form complex undercuts, holes and threads in a single shot.

Introduction

Multi-slide die casting is the most cost-effective route for intricate, thin-wall zinc components at volume. By forming undercuts, cross-holes and threads in the die, we reduce downstream operations and hold tight, repeatable tolerances across long production runs.

Precision CNC Machining | DieCastor

sales@diecastor.com (DieCastor Engineering Team) — Sun, 02 Aug 2026 00:00:00 +0000

Precision CNC Machining

DieCastor delivers precision CNC machined parts in aluminum, steel, stainless and brass, produced on 3- to 5-axis centers with CMM-verified critical dimensions. Tight tolerances, stable processes and full traceability make us a reliable partner from prototype to series volume.

3- to 5-axis machining with CMM-verified critical dimensions.

Manufacturing Capability

Process	Capability
Milling	3-, 4- and 5-axis machining.
Turning	CNC lathes, live tooling.
Inspection	CMM, roughness testing.
Finishing	Deburr, anodize, passivate.

Tolerances & Finish

Tolerances to ±0.01 mm on critical features.
Surface finish to Ra 0.4 µm.
First-article inspection before volume.
Prototype to series volumes.

Materials

Material	Typical use
Aluminum	Automotive, enclosures
Stainless Steel	Marine, food, chemical
Carbon Steel	General industrial
Brass	Valve, instrument parts

Quality Control

In-process checks at setup and during runs.
Final CMM inspection against CAD.
First-article approval before series.
Traceable documentation per order.

Request a Quote

Email sales@diecastor.com or use the form below.

Tooling / Die Mold Manufacturing | DieCastor

sales@diecastor.com (DieCastor Engineering Team) — Sun, 02 Aug 2026 00:00:00 +0000

Tooling / Die Mold Manufacturing

DieCastor designs and builds its own dies and molds in-house — from design-for-manufacturability review and mold flow simulation through CNC and EDM die cutting, trial shots and lifetime maintenance. Owning tooling under one roof keeps quality, lead time and cost predictable.

In-house die design, cutting and maintenance keep tooling quality under our control.

Introduction

Tooling is the foundation of every cast and machined part. By engineering dies and molds internally, we align gate and runner design, cooling and ejection with the part’s function, then validate with trial shots before volume production.

Zinc Casting Manufacturer | DieCastor

sales@diecastor.com (DieCastor Engineering Team) — Sun, 02 Aug 2026 00:00:00 +0000

Zinc Casting Manufacturer

DieCastor is a zinc casting manufacturer producing decorative and functional components — from ZAMAK alloy selection and tooling through to plated, painted and assembled finished parts. Zinc’s fluidity and finish make it ideal for parts where both precision and appearance matter.

From ZAMAK alloy selection and tooling to finished, plated parts.

Capabilities

Alloy selection — ZAMAK 2/3/5/7 and ZA-8.
Tooling — in-house die design and cutting.
Casting — hot chamber multi-slide and conventional.
Finishing — plating, powder coat, passivation.
Assembly — sub-assembly of multi-part components.

Material Options

Material	Key properties	Typical use
ZAMAK 3	Best castability	Connectors, housings
ZAMAK 5	Higher strength	Mechanical parts
ZA-8	Creep resistance	Gears, wear parts

Quality Control

Material verification by spectrometer.
Dimensional inspection against CAD.
Finish validation (plating thickness, adhesion).
Full traceability on every shipment.

Industries Served

Automotive — fittings and small mechanical parts.
Electronics — connector shells and enclosures.
Consumer Products — decorative and functional hardware.

Request a Quote

Email sales@diecastor.com or use the form below.

Zinc Die Casting | DieCastor

sales@diecastor.com (DieCastor Engineering Team) — Sun, 02 Aug 2026 00:00:00 +0000

Zinc Die Casting

DieCastor provides hot chamber zinc die casting in ZAMAK 2/3/5/7 and ZA-8 alloys, delivering thin walls, high dimensional stability and excellent plating and finishing performance. Zinc is the natural choice for complex, high-volume components where appearance and precision both matter.

Hot chamber zinc die casting delivers thin walls and a superior surface for plating.

Introduction

Zinc die casting combines fast cycle times with outstanding dimensional repeatability. Its low melting point and fluidity let us cast fine detail and thin sections that would be difficult or impossible in other processes, making it ideal for connectors, fittings and decorative hardware.